5SF 5-R

Type 5SF / 5SFP Quick-acting Fuse Series (Low Breaking Capacity) 5SF/5SFP Series, 5x20mm Glass Tube Quick-acting Fuse RoHS Compliant Description 5x20mm quick-acting, low breaking capacity, glass tube body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 2. Features - Meet IEC standard 60127-2, sheet 2 Wide operating temperature range Bulk and Tape & Reel packing available Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 Halogen Free Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : "bel", "F", "Current Rating", "L","250V", "Appropriate Safety Logos", "  "（ RoHS compliant） Marking On Label : "bel","5SF”or”5SFP","F","Current Rating","L","Voltage Rating","Interrupting Rating","Appropriate Safety Logos" and " Electrical Characteristics (IEC-127-2 STANDARD SHEET 2) Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MAX 500mA to 6.3A 1 30 50 2 10 300 20 8A to 10A 1 30 50 2 10 400 40 hr. min. ms sec ms ms ms In clause 9.2, the test voltage for 5SFP ratings from 1A to 6.3A is 63VDC. "," "(China RoHS compliant). Safety Agency Approvals Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating SE-S-2002382 500mA-6.3A/250V AC@35A or 10 In whichever is greater 40000509 500mA-10A /250V AC E20624 LR39772 Self-declaration No: 2020970207000128 Ampere Range / Volt @ I.R. ability* 500mA-10A/250V AC@35A or 10 In whichever is greater 500mA-6.3A/250V AC@35A or 10 In whichever is greater *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5SF / 5SFP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Voltage and Interrupting Ratings Agency Approvals Maximum Melting I²T Melting I²T Power